 |
| Author | Post |
|---|
Alidad
Member
| Joined: | Tue Sep 12th, 2006 |
| Location: | |
| Posts: | 1 |
| Status: |
Offline
|
| Mana: |  |
|
Posted: Wed Sep 13th, 2006 03:38 am |
|
I had same problme i finally solve that problme.
when you create file under phpinfo.php or test.php using notepad, make sure that you save as or start from (") "test.php" or "phpinfo.php" not test.php or phpinfo.php, they are two different between (") or non-(").
many people have setup correct but one very small part that many people don't know is how to save file in notepad. This is very simple to know, but look like is not.
and save in htdocs.
alidad
Last edited on Wed Sep 13th, 2006 03:40 am by Alidad
|
buddubk2000
Member
| Joined: | Mon Sep 18th, 2006 |
| Location: | |
| Posts: | 1 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Mon Sep 18th, 2006 11:53 am |
|
Hi,
I am stuck!!
I have apache 1.3 and php 5 installed and am trying to configure php as an apache module. When I include the " AddModule mod_php5.c" to the apache config file, I get an error messege saying it is not in the list of loaded modules.
How should I go about obtaining it?
Thanx!
|
ckw089
Member
| Joined: | Thu Nov 16th, 2006 |
| Location: | |
| Posts: | 4 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Thu Nov 16th, 2006 08:05 am |
|
Hi,
I am the same problem that you have last time. How you resolved the problem ?
The IE will always ask me to save the test.php.
I have tried Apache 2.2.3 with PHP 5.2.0 and also Apache 2.0.59 with PHP 5.1.4, both of them giving me the same problem.
The PHP script is not processed by PHP module.
Hope that u can help. Thanks.
|
ckw089
Member
| Joined: | Thu Nov 16th, 2006 |
| Location: | |
| Posts: | 4 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Thu Nov 16th, 2006 08:22 am |
|
Hi,
Maybe you need to simply your directory name ... I have installed Apache 2.2.3 with PHP 5.2.0 ...
I added below lines into httpd.conf
LoadModule php5_module "c:/php/php5apache2_2.dll"
AddType application/x-hpptd-php .php
PHPIniDir "C:/php"
I can start the Apache server, it is working.
But I still have problem when I try on test.php. IE will ask me to save the file instead.
|
ckw089
Member
| Joined: | Thu Nov 16th, 2006 |
| Location: | |
| Posts: | 4 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Thu Nov 16th, 2006 08:27 am |
|
Hi,
I installed Apache 2.0.59 with PHP5.14 ... And added below lines in httpd.conf
LoadModule php5_module "c:/php/php5apache2.dll"
AddType application/x-hpptd-php .php
PHPIniDir "C:/php"
Try not to have them on the first line.
|
klimaks
Member
| Joined: | Thu Dec 29th, 2005 |
| Location: | |
| Posts: | 52 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Thu Nov 16th, 2006 11:30 am |
|
Yeah you probably had a bad .dll file
"If you use Apache 2.2.x, the included DLLs (php4apache2.dll and php5apache2.dll) will not work for you as they are specific to the Apache 2.0.x API. There is an open bug report to address this issue but if you can't wait then go to the following URL and download an appropriate DLL for Apache 2.2.x"
http://www.apachelounge.com/download/ to find a working one
|
ckw089
Member
| Joined: | Thu Nov 16th, 2006 |
| Location: | |
| Posts: | 4 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Thu Nov 16th, 2006 11:27 pm |
|
I have downloaded below package from http://www.apachelounge.com/download/ and try on Apache 2.2.3 and PHP 5.14.
php5apache2.dll-php5.1.x.zip 24 Aug '06 14K
apache2handler for Apache 2.2.x and PHP 5.1.0-5.1.6
But, I can't even sart the Apache server after copying httpd.exe.manifest into Apache2.2\bin. The error as below
C:\Program Files\Apache Software Foundation\Apache2.2\bin\httpd.exe
This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.
|
southwestgooner
Member
|
Posted: Wed Jun 6th, 2007 06:44 am |
|
Hi,
I am a complete novice with this but willing and looking to learn fast !
Having only worked with HTML prior to now, I am trying PHP for the first time.
I am trying to get a PHP site from my local PC to my free webspace I have with my ISP Virgin Media Broadband (formerly Telewest/Blueyonder Broadband). The root folder address for the uploaded site is http://www.stevearney.pwp.blueyonder.co.uk/genealogy. The site is locally stored in "C:/Apache2.2/htdocs/genealogy"
I am trying to install and configure Apache 2.2.4 to work with PHP 5.2.3.
Can anyone with knowledge of Apache 2 and PHP 5 confirm what I have done to be correct or if not what is wrong?
Here is what I have done so far:
Installed Apache 2.2.4 to C:/Apache2
Followed configuration instructions for C:/Apache2/conf/httpd.conf, C:/Apache2/conf/extras/httpd-manual.conf and C:/Apache2/conf/extras/httpd-vhosts.conf
Copies of the configured files are available to view via:
http://www.stevearney.pwp.blueyonder.co.uk/httpd.conf
http://www.stevearney.pwp.blueyonder.co.uk/httpd-manual.conf
http://www.stevearney.pwp.blueyonder.co.uk/httpd-vhosts.conf
I have then extracted PHP 5.2.3 to C:/Apache2/php5
Copied and renamed php.ini-recommended to php.ini
The php.ini file is stored in C:/Apache2/php5
Followed configuration instructions for PHP.ini
The configured php.ini file is also available to view via:
http://www.stevearney.pwp.blueyonder.co.uk/php.ini
I have then entered <?php phpinfo(); ?> into Notepad, saved as phpinfo.php and stored in "C:/Apache2.2/htdocs" folder.
The problem is as soon as I remove the comment from
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
I get a 'Page Cannot be Displayed error' for the http://localhost and http://localhost/phpinfo.php pages but the http://localhost/manual is still OK.
How do I correctly configure the httpd-vhosts.conf file so as it all works when I remove the comment mark in the #Include conf/extra/httpd-vhosts.conf line of code.
Also when I get it all working how do I upload the site to the http://www.stevearney.pwp.blueyonder.co.uk/genealogy folder and get it recognised in my browser, can this be done via FTP or does it have to be published from my PHP editting application like Dreamweaver?
Any help which would enable to resolve this would be very much appreciated.
Cheers,
southwestgooner.
|
chickennoodles
Member
| Joined: | Fri Aug 17th, 2007 |
| Location: | |
| Posts: | 1 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Fri Aug 17th, 2007 10:59 pm |
|
I'm having some problems too, im new with PHP and Apache. I'm trying to help my dad set up a forum using a something called Drupal. I'm running into problems with PHP. What im trying to get working is PHP 5.2.3 with Apache 2.0.59. I have both installed and Apache is working but I dont know how to set up PHP with Apache...Somewhere in the manual i thought it said that PHP automatically looks for the server you are using (in this case it would be Apache) and dot you have to do anything after to set it up? I tried opening a .php document in localhost/ and it showed up as just text... I'm only 15 and this is really my first time I have worked with this kind of stuff before. I read the manuals and i can only take in about half of what is said. I would appreciate some suggestions or solutions to my problems ^_^
|
swati aggarwal
Member
| Joined: | Tue Mar 18th, 2008 |
| Location: | |
| Posts: | 1 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Tue Mar 18th, 2008 05:02 am |
|
happy_girl wrote: I've installed both apache2 and php5, and i also successfully added the following lines to the httpd.conf file as posted.
LoadModule php5_module "c:/php/php5apache2.dll"
AddType application/x-httpd-php .php
PHPIniDir "C:/php"
However, when i go to run a test page i'm still getting nothing, no errors, nothing, so i'm not sure what i've done wrong... is there something else i'm missing...
also could anyone give me fast pointers on how to configure postgresql into the equation, i've installed it and it works fine, but i'm a little stuck on how it all fits in with apache2 and php5.
please help anyone... sorry atachment is not going actually so i am pasting my coding here
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild 0 #
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2" #
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80 #
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
#load the apache module
#
loadmodule php5_module 'd:/web/webserver/php/php5apache2_2.dll"
#
# Cause the PHP interpreter handle files with a .php extension.
#
<Files *.php>
SetOutputFilter PHP
SetInputFilter PHP
LimitRequestBody 9524288
</Files>
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
#
# Add index.php to the list of files that will be served as directory
# indexes.
#
DirectoryIndex index.php # Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so # 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# #
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin swati_aggarwal25@yahoo.co.in #
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName bharat-4796d353:80 #
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs" #
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Satisfy all
</Directory> #
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# #
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks #
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None #
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all </Directory> #
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html
</IfModule> #
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch> #
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log #
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn <IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule> #
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/access.log common #
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access.log combined
</IfModule> <IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://bharat-4796d353/bar #
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
ScriptAlias /php/" c:/path-to-php-dir/"
AddType application/x-httpd-php .php
Action application/x-httpd-php "/php/php.exe" #
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/" </IfModule> #
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory> #
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be: #!c:/program files/perl/perl # Note you _must_not_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
# #
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain <IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types
addtype application/x_httpd_php.php.html #
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz #
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi # For type maps (negotiated resources):
#AddHandler type-map var #
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
phpindir "d:/web/webserver/php/"
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic #
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://bharat-4796d353/subscription_info.html
# #
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off # Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary. # Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf # Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings
#Include conf/extra/httpd-autoindex.conf # Language settings
#Include conf/extra/httpd-languages.conf # User home directories
#Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf # Virtual hosts
#Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf # Various default settings
#Include conf/extra/httpd-default.conf # Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
|
resource004
Member
| Joined: | Fri Apr 4th, 2008 |
| Location: | |
| Posts: | 65 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Thu Apr 24th, 2008 07:54 am |
|
Hi Friends,
Do you have any problem in web designing and development or do you want any kind of help in PHP/MYSQL or you need reliable and cheap web hosting or have any problem in E-commerce solutions then go to this site http://www.pakandu.com/contactus.php ,
It is a company of web designing and development and it have a great web designers, developers and Programmers.
When I got in any problem of web designing /development and Programming or I need reliable web hosting or facing any problem in E-commerce Solutions then I just go to this site and ask them the solution of my problem and they always provide me best solution for my problem.
So do you have any above problems then contact them without any hesitation.
Regards,
Resource
|
zhao
Member
| Joined: | Sat May 10th, 2008 |
| Location: | Tokyo, Japan |
| Posts: | 1 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Sat May 10th, 2008 11:33 am |
|
also, i have tried many times about same question. but at last it was resolved now. i use the following code insteading of LoadModule php5_module "C:/php/php5apache2.dll"
LoadModule php5_module "c:/PHP/php5apache2_2.dll"
DocumentRoot "c:/PHP"
Note:
because PHP doesnot apache2, we need use php5apache2_2.dll to replace the php5apache2.dll.
Last edited on Sat May 10th, 2008 11:34 am by zhao
|
Current time is 02:59 am | Page:   1 2 3 |
|
|
|
|
